Supplies
-
Binnen Mat
Trimetal Magnacryl Prestige Mat
★★★★★ ★★★★★ 1 reviews- Strak resultaat
- Goed reinigbaar
- Schrobben zonder glans
Step 1
Covering
Cover the area with masking film to prevent splashes and stains on the floor.
Step 2
Cleaning:
Clean the door and remove any grease. Do this with, for example, Alabastine Paint Cleaner and lightly sand the door.
Step 3
Check
for holes or imperfections in the door. These can be easily repaired with a good filler such as Alabastine Fast-Drying Wood Repair. Sand away any other imperfections with sandpaper.
Step 4
Masking:
Cover the door handle and hinges with masking tape suitable for the surface. Check the type of surface carefully to ensure the tape stays in place.
Step 5
Applying Primer
A good primer is Sigma S2U Nova primer. Apply the primer with a roller or brush. Spread it evenly over the door and let it dry.
Step 6
Determine which roller you need.
For smooth doors, it's best to use a felt-tipped roller. The advantage is that this roller can absorb and hold a lot of paint between its short pile.
Primer ensures an even finish and good adhesion of the final color on your doors.
Better to buy too much than too little. Most doors need to be painted twice for the best result. Only then will they look super sleek and can withstand a few knocks. And you'll enjoy your "new doors" for longer!
Order your products below:
-
Binnen Mat
Trimetal Magnacryl Prestige Mat
★★★★★ ★★★★★ 1 reviews- Strak resultaat
- Goed reinigbaar
- Schrobben zonder glans










